Automated Hardness Tester ROCKWELLmodul
Automated Rockwell Hardness testing in the production.
Fully automated hardness testing
Rockwell, Super-Rockwell and Brinell (HBT)
According to DIN EN ISO 6508 and ASTM E18
Control over SPS (incl. GOOD/BAD rating)
Implementable in production plants
Very flexible mounting options
The hardness testing machines are designed for production support and 100%-Checks for higher quantities. Owing to the new design you are able to integrate it into production plants without any problems.
Every machine consist of the hardness test module and a separated control unit, which can be built into a electric cabinet.
Versions for every Rockwell-procedure are part of the program.
The Brinell-machines use a modified procedure to scale the penetration, since the optical measuring of the indentation isn't useful in a fast, automated testing.
The test load is regulated and scaled steadily during the load application. The result is a high accuracy with a fast measuring speed.
The test cycle will be triggered over the Start-input, after the test object is positioned. The standardized test cycles lasts approx. 20 Sec. When the test is completed, the Ready-output signalizes, that the test object can be removed. The test result will be evaluated according to the adjusted borders and the switched outputs are set. The hardness value can be requested over USB, RS232 Interface or TCP/IP-LAN.
Technical Data
Hardness scale |
Rockwell and Super-Rockwell-Procedure, others on request |
Test load (Rockwell) |
Chooseable from 15-150 kg |
Hardness resolution |
0,1 HRC |
Lifting |
20 mm |
Test cycle |
Approx. 20 Sec. |
Power supply |
85-264 V / AC |
Dimensions |
75 mm x 120 mm x 420 mm |
Installation |
Tapped holes on the back side |
Control unit |
19″-Case, 3 HE |
Connection to SPS |
Switch-output, (potential-free) |
Interface |
USB, RS232, Ethernet |
Display |
Color-LCD |
Accessories
Certified test blocks
>>> CÓ THỂ BẠN QUAN TÂM >>>
Tủ thử nghiệm lão hóa do thời tiết
Tủ thử nghiệm nhiệt độ, áp suất theo độ cao
Tủ thử nghiệm chống xâm nhập IPx
Thiết bị thử nghiệm rơi và va đập
BAQ GmbH hoạt động trong lĩnh vực kiểm tra vật liệu từ năm 1992. Dòng sản phẩm bao gồm máy kiểm tra độ cứng cố định và di động (Vickers, Rockwell, Brinell, Shore, độ cứng va đập và phương pháp trở kháng tiếp xúc siêu âm (UCI)) cũng như các thiết bị kiểm tra độ dày lớp , khả năng chống mài mòn, chống trầy xước và độ bám dính của lớp phủ. Những thiết bị này được sử dụng trong tất cả các lĩnh vực thử nghiệm vật liệu, ví dụ: kiểm tra hàng hóa đầu vào, sản xuất, nghiên cứu và phát triển. Hơn 25 năm kinh nghiệm và hợp tác liên tục với Viện Kỹ thuật Bề mặt và Màng mỏng Fraunhofer và các tổ chức khác cũng như hoạt động phát triển và sản xuất nội bộ tại Đức đảm bảo chất lượng tốt và dịch vụ tối ưu. BAQ cũng cung cấp các giải pháp tối ưu cho các yêu cầu đặc biệt.