HAST (Highly Accelerated Stress Test) chambers can perform very extreme accelerated test, which is applied to test high temperature and high humidity resistance of product or material under condition of specified temperature (above 100°C), humidity (65% to 100%) and specified pressure. HAST is one method of environmental tests used for electrical and electronic parts and devices. HAST (PCT) Chamber is mainly used for testing semiconductors, IC packing, plastic sealed parts and so on, meeting JESD22-A100 to A118 bias (BHAST) or unbias (UHAST) accelerated moisture resistance test and pct test. HAST (PCT) Chamber adopts a double-layer arc inner tank design to prevent condensation and dripping water. Thereby avoiding the influence of test results due to the direct impact of superheated steam.

The temperature&humidity&vibration three comprehensive test machine is integrated with mechanical stress test such as temperature, humidity and vibration. When the test system is working, the (high temperature,low temperature and temperature change) stress ,temperature stress, vibration stress and the electric stress should be applied to the specified combination mode and the periodic space operation, simultaneously or separately.

Faster Temperature Humidity Chamber is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test.

The temperature and humidity test chamber is widely used in scientific research, research institutes, quality inspection institutes and other industries to do warm and humid heat tests of electronic and electrical products, materials, parts, equipment, etc.

AGREE Test Chamber is suitable for high temperature, low temperature, high low temperature cycle and temperature stress screening (ESS) test for whole machine products and spare parts. The vibration table is connected with the constant temperature humidity test, then it can realize the temperature, humidity, vibration comprehensive test.

Temperature Testing Equipment/ Chamber ET Series with Explosion Proof and widely used in Battery Test with safety for automotive vehicles, mobile phones, etc.

This machine is to test heat endurance, cold endurance, dry endurance, wet endurance of various materials. It applies for quality control of electronic goods, electric appliance, measurement device, food, automobile, metal, chemical, plywood, aviation, medical and etc.

Two sets of systems are configured, and each layer is independently controlled in temperature; Continuous uninterrupted working time ≥1000h under the test condition of 140 °C; Equipped with an explosion-proof pressure relief port, when the pressure increases sharply, the pressure relief port automatically opens; The smoke flame sensor detects the smoke flame and fire extinguishing system to extinguish the fire in the box; Explosion-proof safety design of the cabinet, equipped with explosion-proof chain, glass explosion-proof membrane, insulation layer using aluminium silicate insulation and insulation material;

Rapid temperature changes (damp heat) test chamber is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test.

Temperature and humidity test chamber simulating product under the condition of temperature and humidity combination (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the adaptability and characteristics of the product itself have changed.

Battery Test Chambers can be used for safety testing for compliance with the UN Recommendations on the Transport of Dangerous Goods needed for lithium-ion batteries.

The temperature&humidity&vibration three comprehensive test machine is integrated with mechanical stress test such as temperature, humidity and vibration. When the test system is working, the (high temperature,low temperature and temperature change) stress ,temperature stress, vibration stress and the