The temperature&humidity&vibration three comprehensive test machine is integrated with mechanical stress test such as temperature, humidity and vibration. When the test system is working, the (high temperature,low temperature and temperature change) stress ,temperature stress, vibration stress and the electric stress should be applied to the specified combination mode and the periodic space operation, simultaneously or separately.

The HT-RHP-23BT Temperature and Humidity Test Chamber is designed to test and evaluate the performance and parameters of electrical, electronic, and various other materials after exposure to environmental changes in temperature and humidity. With its compact design, space-saving footprint, and easy mobility, this benchtop chamber is ideal for workplaces with limited space.

Temperature and humidity test chambers are used for inspecting the equipment and testing the performance of heat resistance, cold resistance, dry resistance and moisture resistance, which is applicable for electronics.

Sanwood walk-in constant temperature and humidity test chamber is a device used to test and verify the performance and reliability of materials, products or equipment under specific temperature and humidity conditions. This type of test chamber usually has a large internal space, allowing experiment

Formaldehyde Emission Test Chamber is suitable for the determination of formaldehyde emission from various wood-based panels, composite wood flooring and other indoor decorative materials, the constant temperature and humidity balance treatment of wood or wood-based panels, and the detection of volatile harmful gases in other building materials.

HAST (Highly Accelerated Stress Test) chambers can perform very extreme accelerated test, which is applied to test high temperature and high humidity resistance of product or material under condition of specified temperature (above 100°C), humidity (65% to 100%) and specified pressure. HAST is one method of environmental tests used for electrical and electronic parts and devices. HAST (PCT) Chamber is mainly used for testing semiconductors, IC packing, plastic sealed parts and so on, meeting JESD22-A100 to A118 bias (BHAST) or unbias (UHAST) accelerated moisture resistance test and pct test. HAST (PCT) Chamber adopts a double-layer arc inner tank design to prevent condensation and dripping water. Thereby avoiding the influence of test results due to the direct impact of superheated steam.

Three-layer temperature and humidity test chamber adopts three sets of independent refrigerant system, heating humidifying system and control system, which greatly reduces the operating cost, it is the mandatory test equipment for aviation, automobile, home appliance, scientific research and other

The double-layer temperature and humidity test chamber has two independent temperature and humidity control systems, which saves energy and reduces operating costs. It can simulate high temperature, low temperature, alternating humidity and heat, constant humidity and heat and other environmental

The battery charge&discharge test chamber is a device specially designed for charging and discharging safety tests on batteries ( such as lithium-ion batteries).This type of test chamber can simulate the extreme charge and discharge conditions that the battery may encounter in actual use to evaluate

Liquid-cooled high and low temperature test chamber is a device used to test the performance of materials or products under extreme temperatures. It can simulate drastic changes in ambient temperature and usually achieve rapid transitions between high and low temperatures to facilitate the evaluatio