Temperature and humidity test chambers are used for inspecting the equipment and testing the performance of heat resistance, cold resistance, dry resistance and moisture resistance, which is applicable for electronics.

The temperature&humidity&vibration three comprehensive test machine is integrated with mechanical stress test such as temperature, humidity and vibration. When the test system is working, the (high temperature,low temperature and temperature change) stress ,temperature stress, vibration stress and the electric stress should be applied to the specified combination mode and the periodic space operation, simultaneously or separately.

Sanwood walk-in constant temperature and humidity test chamber is a device used to test and verify the performance and reliability of materials, products or equipment under specific temperature and humidity conditions. This type of test chamber usually has a large internal space, allowing experiment

Introducing CRYSOUND’s cutting-edge acoustic imaging camera, revolutionizing industrial inspections with advanced capabilities. The CRY8124 acoustic imaging camera excels at pinpointing leaks, identifying electrical partial discharge, and detecting mechanical deterioration. Setting a new standard for sensitivity and efficiency, the CRY8124 boasts 200 microphones (the most in the industry). The device detects smaller leaks and partial discharges from greater distance than any other handheld acoustic imaging camera on the market. The CRY8124 reporting software allows offline analysis, editing, and report generation, simplifying regular maintenance routines. Elevate the effectiveness of your industrial inspections with CRYSOUND’s acoustic cameras.

The spring fatigue testing machine can be used for tensile or compression durability tests of small helical springs or other elastic components. After the installation of auxiliary equipment, the machine can also be used to test the durability of components, button springs, and other cases requiring durability testing.

The CRY2623 is a 128-mic industrial acoustic imaging camera that is user-friendly and requires minimal training. Its durable aluminum alloy shell is built to withstand complex and variable working conditions. The device offers real-time acoustic imaging, significantly accelerating the detection of pressurized or vacuum leaks compared to traditional methods. It supports both photo and video modes for flexible on-site data recording. With an expandable large-capacity TF storage card, test results can be quickly exported and reported. The CRY2623 helps enterprises reduce safety risks and minimize economic losses associated with gas leaks, partial discharges, and other malfunctions.

oad, strength, elongation, internal tearing strength and bending test for various products such as fiber, rubber, film, plastic, wood and metal. It is also used to perform static load test, repetitive fatigue test and friction coefficient test including general tests such as compression, tensile, tear bending and peeling test. The high-precision controller enables to control the machine easily. Also the machine is controlled by PC with software.

HAST (Highly Accelerated Stress Test) chambers can perform very extreme accelerated test, which is applied to test high temperature and high humidity resistance of product or material under condition of specified temperature (above 100°C), humidity (65% to 100%) and specified pressure. HAST is one method of environmental tests used for electrical and electronic parts and devices. HAST (PCT) Chamber is mainly used for testing semiconductors, IC packing, plastic sealed parts and so on, meeting JESD22-A100 to A118 bias (BHAST) or unbias (UHAST) accelerated moisture resistance test and pct test. HAST (PCT) Chamber adopts a double-layer arc inner tank design to prevent condensation and dripping water. Thereby avoiding the influence of test results due to the direct impact of superheated steam.

For large packaging with high mass, the vertical drop height during transport will be low and therefore they need drop test with relatively low drop height. Zero Height Drop Tester is mainly used for drop test of big package. It uses an E-shaped fork as a bracket that can move downward quickly and the specimen is placed in balance according to test requirement(surface, edge or corner drop test). During Testing, the bracket moves downwards quickly ahead of specimen with acceleration greater than 3G to ensure the separation of bracket and specimen and achieve free fall. The standard fall distance is ranged between 2.54cm-120cm.

The CRY2851 sound level meter is developed specifically for noise monitoring in various application scenarios. The product series meets the relevant requirements of the GB/T 3785.1-2023/IEC61672-1:2013 standards, offering Class 1 accuracy products. in addition, based on different customer needs, a variety of functional options can be provided, including integral measurement, statistical analysis, 1/1 Oct,1/3 Oct, FFT analysis. The CRY2851 adapts to diverse monitoring scenarios, making it ideal for applications such as environmental noise monitoring, traffic noise assessments, online noise pollution tracking, occupational health evaluations, and airport noise monitoring. Its flexibility and precision help establish accurate and reliable noise monitoring capabilities.

The CRY2624 is a 128-mic industrial acoustic imaging camera and is designed for use in explosive environments within the chemical and energy industries. Featuring a robust aluminum alloy shell, this device is built to withstand complex and dynamic work conditions. It offers real-time sound image display, significantly improving the speed of detecting pressurized or vacuum leaks compared to other methods. The CRY2624 is ATEX certified with a rating of II 3G Ex ic IIC T5 Gc, ensuring safe operation in potentially explosive atmospheres while adhering to stringent safety standards. The device supports camera and video modes, providing flexible on-site data recording. With an expandable large-capacity TF storage card, test results can be quickly exported and reported. This camera helps industrial facilities minimize losses from gas leaks, partial discharge, and other accidents, enhancing overall safety and operational efficiency. ‍

The CRY2620 Industrial Acoustic Imaging Camera is designed for ease of use and quick operation. Its robust aluminum alloy shell ensures durability, making it adaptable to complex and changing work environments. The device provides a real-time sound image display, significantly accelerating the detection of pressurized or vacuum leaks compared to traditional methods. The CRY2620 simplifies testing with just two adjustable parameters: test frequency range and dynamic range, covering most testing needs. It offers multiple modes, including camera and video modes, along with flexible on-site data recording. The large-capacity TF storage card is expandable, allowing for quick export and reporting of test results. This device helps enterprises minimize losses from gas leaks and other accidents, enhancing overall operational safety.