The temperature and humidity environment test chamber HUD-E702 is used in testing with electrical and electronic components and equipment, cars, aviation,...

This tester is a device to test the reliability of component materials and products. It is a device that checks the thermal characteristics of materials and products due to rapid temperature changes (within 5 minutes). Equipped with a high-performance cooler, the test temperature is reached quickly and noise and vibration are low. Additionally, various safety devices are built in to prevent malfunction.

This tester is being used changeable chemical products parts of an automobile and diversity products are influenced by environments like rays of the sun, rain and snow. It measures up the standard method about physical and chemical attribute standard in addition, the reliable material and product are accelerated by the tester in a short time

Compared with the bench-top xenon lamp aging test chamber, the small xenon lamp aging test chamber adds a spray function to simulate the influence of rain or other moisture when the material is actually used outdoors. At the same time, it can also pass Monitor the total radiant energy value obtained by the sample during the test to control the interruption of the test. The operator can arbitrarily set various parameters (irradiation energy, irradiation time, blackboard temperature, spray time, etc.) required for the test through the man-machine interface, and can check the operating status of the machine at any time. The operating parameters during the test can be Download directly to the computer via the USB interface.

Temperature 2-Zone Thermal Shock Testing Equipment, Programmable Electronics. Thermal shock chambers are widely used in testing with automotive, electronic parts,...

High Pressure Water Spray Test chamber IPx9K is suitable for the IPX9K waterproof level test of the product. The main function of this equipment is for passenger cars, buses, tractors, motorcycles and other vehicles and their parts, under the cleaning process conditions of high pressure/steam jet cleaning, To test the physical and other related properties of the product.

SONACME Xenon test chamber equipped with three xenon lamps imported from Amercia and daylight filter,can meet with all standards'requirements. The Xenon Test Chamber can hold 27 pieces samples, not only has spray function ,but also can control the relative humidity of working room. Operator can set all required test parameters （Irradiance, test time, BPT etc）through the touch screen, and can check its running status at any time. All running parameters can be exported to computer through the USB interface.

SONACME rain test chamber ipx34/56/9k is used to test the IPX3IPX4IPX5IPX6IPX9k waterproof grades of the products. The test samples include electronic components, outdoor lamps, mobile phone shells, auto parts, etc. Touch screen, new operating system, more remote operation, convenient and fast. Comply with IEC60529:1989+A1:1999 +A2:2013 "Degrees of protection provided by enclosures (IP Code)" test standard.

Salt spray corrosion test chamber (Salt spray test chamber, salt box, salt spray test machine, salt spray corrosion test chamber) can be used to assessing the ability of salt spray corrosion resistant materials. It can be used to assessment materials and their resistance to salt spray corrosion protection layer capacity, whether you are testing hardware industry, screw industry, electroplate industry, automotive and motorcycle parts, communication industry, computer industry, electronic industry, coating industry, research institution, etc, our salt spray test chamber can offer you a best solution.Due to the increasingly harsh environment, Salt Spray Tester becomes more and more popular. Salt Spray Tester has been the most hot selling products these days, for the fast delivery time and reasonable price of Salt Spray Tester.

UV lamp weathering test chamber, find complete details about UV lamp weathering test chamber,UV test chamber,UV Lamp Test Chamber,UV weathering test chamber. The UV Lamp Weathering Chamber uses a fluorescent ultraviolet lamp as a light source, and appropriately controls the temperature and humidity to periodically generate condensation on the sample to comprehensively obtain the damage of the sunlight, moisture and temperature on the polymer material. It can make a result of damage effects for polymer materials (material aging includes fading, loss of light, strength reduction, cracking, flaking, chalking and oxidation, etc.)

The rotating rack xenon arc chamber is a full featured weathering and lightfastness chamber at a breakthrough price.cost-effective, easy to use and easy to maintain xenon lamp aging test chamber. It uses an air-cooled xenon lamp imported from the United States, which can be more realistic and optimal. The full-spectrum distribution of outdoor sunlight is simulated to ensure that the laboratory test results have a very good correlation with the actual outdoor application of the material. In addition, the special drum-shaped design of the sample rack can ensure that all samples can be irradiated uniformly during the test. The Xenon Lamp Weathering test chambermeets the requirements of various domestic and foreign xenon lamp testing standards and in various industries. It can accommodate 22 standard samples, not only has the spray function, but also can control the relative humidity in the working room.

With an drying laboratory apparatus, sterilize specimen, water measurement, material tests in constant temperature and low or high temperature are possible.