KU universal material testing machine series is to test the material property by measuring load, strength, elongation, internal tearing strength and bending test for various products such as fiber, rubber, film, plastic, wood and metal. It is also used to perform static load test, repetitive fatigue test and friction coefficient test including general tests such as compression, tensile, tear bending and peeling test. The high-precision controller enables to control the machine easily. Also the machine is controlled by PC with software.

KU universal material testing machine series is to test the material property by measuring load, strength, elongation, internal tearing strength and bending test for various products such as fiber, rubber, film, plastic, wood and metal. It is also used to perform static load test, repetitive fatigue test and friction coefficient test including general tests such as compression, tensile, tear bending and peeling test. The high-precision controller enables to control the machine easily. Also the machine is controlled by PC with software.

The RS-8220V-XY Automatic Steel Ball Impact Tester is designed to test the impact resistance of steel balls on glass covers or rubber casings of mobile phones, tablet PCs, e-books, batteries, electronic dictionaries, and touch screen modules to assess the impact strength of the product.

In order to test the reliability of various parts and products, various temperature and humidity change tests are necessary. Basically, it has a rich program setting function of 30 patterns and 300 segments, so it is possible to create a variety of test environments. Up to 30 groups of test conditions can be saved, and only the necessary groups can be easily executed.

This equipment is a tester that evaluates the durability of the hinge and latch of a vehicle tailgate.

The PPM 329 Leak test stand allows tightness tests on common rails and other components. The pressure is generated through a pressure convertor, while the SF6 is contained in the high-pressure medium. A leakage is determined in the vacuum chamber with a laser sensor. For efficiency, a clamping device is located in the test chamber. It is adjustable and can be used for almost every type of common rail. Adaptation of the rails is enabled through high-pressure hoses and couplings. The control unit is a Siemens PLC and involves a touch panel as an input and display unit.

Components are exposed to extremely high pressures during operation and must be tested for quality and material fatigue. Our high-pressure test bench for burst pressure tests up to 15,000 bar can put any component to the test.

In order to prove the quality of media-carrying components, hoses, lines, pipes and many other pressure vessels are pressurized until they burst. Accordingly, our standard pressure test bench can be equipped with a simple pump solution or a high-tech hydraulic intensifier to adjust to your needs.

The Climate Test Chambers solution brands will help you to test the influence of temperature and humidity on the properties, function and lifespan of your products.

The ball crater test (Calotest) is a well established method for the determination of layer thickness. With a rotating steel ball and an abrasive slurry, a spherical cap is ground through the coating into the base material of the sample. When examined with a microscope, the layer/base material interface appears as a circle or, in case of a multilayer coating, a system of concentric circles. The layer thickness can be calculated from the diameters of these circles and the diameter of the grinding ball.

Jinoush's M2010 semi-automatic optical measuring machine is widely used in samples, metal processing, watches, precision electronic shrapnel, mobile phone accessories, connectors, internal circuit boards, plastic parts, knife codes, display panels, electronics manufacturing and other industries.