Poldi Impact Hardness Tester. This is the simplest and most economical device for detecting hardness according to Brinell and determining tensile strength of engineering and tool steels, dies, forgjngs, railway material, beams, sheets, pipes, cast steel and various parts of steel as well as determining hardness according to Brinell for cast bronze, aluminium, brass, copper, grey and chilled cast iron.

The scratch tester easyScratch is used to determine the adhesion between the coating and the base material according to DIN EN ISO 20502 and ASTM C1624. Under load, a diamond stylus is drawn across the to be tested coating system. The coating damage is assessed under a microscope. Several coating damage, such as cracks, chipping and spalling can occur.

Universal Test Machine is suitable for machinery manufacturing,electronic appliances,automobile production,textile chemical fiber,wire and cable,packaging materials and other industries. Various tests such as tensile, compression, bending, shearing, peeling, tearing, and two-point extension (extensometers are required) are performed on materials or semi-finished products.

P.I.D self-adjusting mode and SSR control High Low Temperature Universal Testing Machine. Apply for tensile, compress, bending, peel, tearing, peeling, bursting, fatigue test on metal rod, metal plate, rubber, PU, leather, plastic, foam, sponge, water-proof material, cable, wire, fabric, nettle, non-woven, etc.

For static and cuasi-static test (low frequency fatigue) for high loads in many types of tests. Specially indicated to switch test mode, thanks to its dual space design. The choice of test mode tensile / compressive or tensile bending can be performed without switching devices, increasing the productivity.

Universal Testing Machine UNITEST M2 is a representative test equipment for physical properties. It is capable of measuring load, strength, elongation of products or materials such as rubber, film, plastic, metal, etc. Basically, Tests of fullering, tearing, compression, flexural, desquamation are available. Hardness (ILD, IFD), static load, repeat fatigue tests, the friction coefficient measurement test are also available.

Calotest device for the determination of wear coefficients and layer thicknesses

-It is a single column model that can be tested under 5 kN -UNITEST M1 is widely used for testing materials such as films, rubber, fibers, medical devices, biomaterials, and wires, etc. -The main feature of the UNITEST M1 is that it requires a small footprint.

Servo Control Universal Testing Machine can achieve the closed loop control in force value, speed & displacement, so can satisfy the fatigue test of rubber and durable test of other material in the condition of low cycle.

Vibrometer is a portable device that allows for express diagnostics of the vibration state of various equipment by the root mean square value (RMS) of vibration velocity (ADL-P1), vibration acceleration and vibration displacement (ADL-P3)

Universal hardness tester designed for measuring the hardness of metallic products. The device uses two methods of hardness measurement – ultrasonic and dynamic.

It is applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile, Organic / Inorganic and components testing. It is widely used in the corresponding industries, research and development, test institutes and training centers etc.