Walk-in Test Chamber HUD-E705-8

Thông số kỹ thuật
Thông tin NSX

Product introduction

Walk-in test chamber is large testing equipment of constant temperature and humidity test chamber series, according to the requirements of users can change the chamber size and function;walk-in test chamber is typically used for testing or storing products that require a large capacity chamber.

Specifications of Walk-in test chamber

Model	HUD-E705-8
Temperature Range	-50c To +100c
Humidity Range	40% To 98% Rh
Dimension (Internal) (w x d x h)	1500 x 1500 x 3000 mm
Dimension (External) (w x d x h)	2850 x 1700 x 3200 mm
Ramp	Variable, Temp. 0~5c / Min & Humidity 0~5%/Min In Average, No Load
Accuracy	Temp. ±1c, Humidity ±2.5%Rh
Interior Walls	Stainless Steel 304
Exterior Walls	Cold Rolled Stell Plate With Baking Finish
Temperature & Humidity Measurement And Controller	32 Bit Control And Monitoring System. Interface Facility With Rs232 Programmable Temp. Humid. Controller
Viewing Window	Multi Pane Glass Window Size
Port Holes	50 Mm Diameter For Wire Routing
Power Supply Requirement	Three Phase, Ac380 v ± 10 %, 50 Hz
Sound Pressure Level	Sound Pressure Level
Condenser Cooling	Water Cooled

Electrical Panel Controller Feature

1.All power connectors, protection devices power control logic built in the control panel integrated to the chamber

2.All electrical cables tagged with id number

3.All electrical function circuit equipped with its own safety device that shuts down the relevant circuit or the entire test chamber if a faulty develops

4.All electrical systems comply with recognized technical regulation as well as with the accident prevention regulations.

Walk-in test chamber meet following standards

GB/BT2423.2-89 high temperature test method

GB2423.1-89 test A: low temperature test method

GJB150.4-1986 test at low temperature

IEC60068-2-1 low temperature test method

IEC60068-2-38 temperature cycle

IEC60068-2-78 constant humidity temperature

Huda's team summary

Product inspection and online quality assurance

Huda has extensive experience in working with many manufacturers around the world to solve online product inspections. Our product inspection system enables you to continuously obtain the highest efficiency and best measurement, and to ensure constant equipment quality accuracy by intelligently combining various inspection assurance measures.

Huda team

R & D team

The Huda R&D team has its own professional R&D team, which is composed of a group of capable and energetic talents in electromechanics, machinery, new materials, molds, etc., led by senior engineers with more than 17 years of R&D and design experience.

Sales team

The Huda sales team is composed of more than 50 employees, 100% with a bachelor's degree or above, and an average age of 25 years old. It is full of vitality, positive and progressive, and a serious and persistent attitude is an important prerequisite for us to create performance.

Factory assembly team

The Huda production and assembly team has the most professional and accurate testing technology. 17 years of production experience allows us to better guarantee the quality of our products and to receive our customers and agents with efficient services.