This test equipment is designed to test the clutch durability, and incorporates a high-performance hydraulic valve to manifest fast response speeds for high-speed testing. Control is applied using the computer, and tests can be conducted by instructing various waveforms. It applies the feedback control method for static·dynamic tests, and was designed as a computer controlled type to support higher user safety, convenience, precision and durability

Universal Testing Machine UNITEST M2 is a representative test equipment for physical properties. It is capable of measuring load, strength, elongation of products or materials such as rubber, film, plastic, metal, etc. Basically, Tests of fullering, tearing, compression, flexural, desquamation are available. Hardness (ILD, IFD), static load, repeat fatigue tests, the friction coefficient measurement test are also available.

Universal Testing Machine is a representative test equipment for physical properties. It is capable of measuring load, strength, elongation of products or materials such as rubber, film, plastic, metal, etc.

This tester is a device to test the reliability of component materials and products. It is a device that checks the thermal characteristics of materials and products due to rapid temperature changes (within 5 minutes). Equipped with a high-performance cooler, the test temperature is reached quickly and noise and vibration are low. Additionally, various safety devices are built in to prevent malfunction.

This tester is being used changeable chemical products parts of an automobile and diversity products are influenced by environments like rays of the sun, rain and snow. It measures up the standard method about physical and chemical attribute standard in addition, the reliable material and product are accelerated by the tester in a short time

With an drying laboratory apparatus, sterilize specimen, water measurement, material tests in constant temperature and low or high temperature are possible.

This is a device for measuring the hardness and aging deformation of rubber, automobile, and electronic component materials according to heat sources, and is used to observe the deformation state after drying the sample with hot air to maintain uniform heat distribution.

-It is a single column model that can be tested under 5 kN -UNITEST M1 is widely used for testing materials such as films, rubber, fibers, medical devices, biomaterials, and wires, etc. -The main feature of the UNITEST M1 is that it requires a small footprint.

Universal Testing Machine is a representative test equipment for physical properties. It is capable of measuring load, strength, elongation of products or materials such as rubber, film, plastic, metal, etc. Basically, Tests of fullering, tearing, compression, flexural, desquamation are available. Hardness (ILD, IFD), static load, repeat fatigue tests, the friction coefficient measurement test are also available.