SONACME UV accelerated weathering tester uses fluorescent ultraviolet lamps as the light source, and appropriately controls the temperature and humidity to periodically produce condensation on the samples to fully obtain the results of the damage of sunlight, humidity and temperature on polymer materials (material aging) Including fading, loss of gloss, strength reduction, cracking, peeling, chalking and oxidation, etc.

Compared with the bench-top xenon lamp aging test chamber, the small xenon lamp aging test chamber adds a spray function to simulate the influence of rain or other moisture when the material is actually used outdoors. At the same time, it can also pass Monitor the total radiant energy value obtained by the sample during the test to control the interruption of the test. The operator can arbitrarily set various parameters (irradiation energy, irradiation time, blackboard temperature, spray time, etc.) required for the test through the man-machine interface, and can check the operating status of the machine at any time. The operating parameters during the test can be Download directly to the computer via the USB interface.

SONACME Xenon test chamber equipped with three xenon lamps imported from Amercia and daylight filter,can meet with all standards'requirements. The Xenon Test Chamber can hold 27 pieces samples, not only has spray function ,but also can control the relative humidity of working room. Operator can set all required test parameters （Irradiance, test time, BPT etc）through the touch screen, and can check its running status at any time. All running parameters can be exported to computer through the USB interface.

UV lamp weathering test chamber, find complete details about UV lamp weathering test chamber,UV test chamber,UV Lamp Test Chamber,UV weathering test chamber. The UV Lamp Weathering Chamber uses a fluorescent ultraviolet lamp as a light source, and appropriately controls the temperature and humidity to periodically generate condensation on the sample to comprehensively obtain the damage of the sunlight, moisture and temperature on the polymer material. It can make a result of damage effects for polymer materials (material aging includes fading, loss of light, strength reduction, cracking, flaking, chalking and oxidation, etc.)

The rotating rack xenon arc chamber is a full featured weathering and lightfastness chamber at a breakthrough price.cost-effective, easy to use and easy to maintain xenon lamp aging test chamber. It uses an air-cooled xenon lamp imported from the United States, which can be more realistic and optimal. The full-spectrum distribution of outdoor sunlight is simulated to ensure that the laboratory test results have a very good correlation with the actual outdoor application of the material. In addition, the special drum-shaped design of the sample rack can ensure that all samples can be irradiated uniformly during the test. The Xenon Lamp Weathering test chambermeets the requirements of various domestic and foreign xenon lamp testing standards and in various industries. It can accommodate 22 standard samples, not only has the spray function, but also can control the relative humidity in the working room.

This is a device for measuring the hardness and aging deformation of rubber, automobile, and electronic component materials according to heat sources, and is used to observe the deformation state after drying the sample with hot air to maintain uniform heat distribution.